Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing Weathertron thermostat with Honeywell
[ 7 Answers ]
I am attempting to replace our Weathertron thermostat with a Honeywell RTH3100C. We have a Trane heatpump system. I am having trouble with the wiring. My wires don't match the 'less common wire designations' in the manual. I have the following wires on the Weathertron: R-red T-brown O-orange...
Replacing old thermostat with a Honeywell RTH230B
[ 4 Answers ]
I am replacing my old Honeywell mecury thermostat with a programmable Honeywell RTH230B. I have two unmarked wires (red & white) connected to the old thermostat. I know, given my furnace, that I need to use connections "RH" and "W" on my new thermostat. What wire, Red/White goes to what...
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Honeywell RTH 7400 Thermostat wiring for Heat Pump (Rheem)
[ 2 Answers ]
I am trying to hook up a Honeywell RTH 7400 Tstat to the existing Rheem HVAC in my house. Currently using Rheem thermostat that came with the house (non-programmeable, using mercury tubes). Heating is provided by a heat pump as well as Natural gas furnace for aux heating (besides the air...
Please Help w/Replacing Honeywell Thermostat...
[ 3 Answers ]
Hi! I've just removed my Honeywell Thermostat and am trying to replace it with a Noma programmable tstat... but am having problems with the wiring. There are 5 wires coming out of the wall - Green, Black, Orange, Red and White, and only 4 posts on the Noma tstat (Green, Red, Yellow and White). ... View more questions Search
|