Ask Experts Questions for FREE Help !
Ask
    Jpatc's Avatar
    Jpatc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 23, 2012, 04:30 AM
    #2 cable will not feed through 2" PVC LB
    Cannot feed #2 4 conductor wire through 2" PVC LB box without high force effort which divots the insulation
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Sep 23, 2012, 04:40 AM
    There is no reason 4- #2's should be any problem in 2".
    How are you doing this? Please don't tell me you are trying to pull them through the LB.
    Are you pulling a big loop out of the LB and then feeding them into the other side?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #3

    Sep 23, 2012, 05:10 AM
    What kind of cable?
    shuntripper's Avatar
    shuntripper Posts: 180, Reputation: 8
    Junior Member
    		  
    #4

    Sep 23, 2012, 05:50 AM
    Quote Originally Posted by tkrussell View Post
    What kind of cable?
    Aluminum 4 conductor SE? Maybe. My guess.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can ser cable be installed in pvc conduit [ 3 Answers ]

Can ser cable run underground in rigid pvc conduit

I istalled 3/4 " PVC in cement. Mortar got into the PVC. How do I get it out? [ 1 Answers ]

I installed 3/4" PVC in cement for load levellers. Mortar got into the PVC when they were building the structure. The Mortar hardened int the 90 degree fittings. How do I get it out? Is there some type of acid or something?

Can I use a 4mm cable off a 2.5mm circuitto feed a electric oven? [ 0 Answers ]

Hi, I have a new electric oven that needs a 4mm 2c+e supply, at the moment there is a 2.5 mm 2c+e powerpoint supply. Would this be sufficient? Is it possible to use a 4mm c+e lead coming from the 2.5mm powerpoint to supply this oven? Also the cable going to this powerpoint is single core so would...

Generator underground feed cable size [ 18 Answers ]

I need to install a 175 foot underground feed between a generator and a building and need help with finding the wire. My research indicates I can use either a copper 2-2-2-4 thhn or aluminum 00-00-00-1 thhn in a grey schedule 40 conduit. Is my research correct? What is the precise desingation...

How to disconnect copper elbo from wall feed PVC [ 3 Answers ]

I am installing a new water softener. If I could rotate the existing copper elbow feed, for old softener, it would make the new installation much neater. How can I rotate an elbow connected into PVC that has a clamp?

View more questions Search