Ask Experts Questions for FREE Help !
Ask
    jenmiller's Avatar
    jenmiller Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 3, 2005, 01:03 PM
    Loss of hot water pressure
    The hot water pressure(cold is fine) throughout my house except for the washer and basement faucet has decreased to just a little more than a trickle and is taking forever become hot. I live in an old house and my husband is thinking that we will need to put in all new plumbing. What can we do to try to solve this situation that is not so drastic? Please help I’m really tried of taking cold showers!
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 3, 2005, 01:51 PM
    Loss of hot water pressure
    Hi Jen,

    It sounds like you have galvanized piping and I'll bet you don't flush your heater on a regular monthly maintenance schedule. Over the years galvanized pipes build up iron oxcide,(rust) and the hot water pipes add to the problem by introducing mineral build-up from the heater. Your best bet may be to replace the hot water pipes with CPVC plastic pipes. You may try to flush the lines by turning off the water and opening up the faucets and checking the inlet ports in the cartridge for crud. Then with the faucet still open turn on the hot water and flush out the supply line.

    Let me show you how to flush your heater. Attach a hose to the boiler drain at the bottom of the tank. With the pressure on, open the boiler drain and let it run until the water runs clear. You will see a spurt of red,(rust) and some white grains,(lime or calcium carbonate). The whole thing shouldn't take more then a few minutes. Don't forget to flush it out every month. Your heater will thank you for it. You might want to consider cleaning the screens on your areators if you have a high mineral buildup. If thev problem still persists after you have flushed, you will have to drain the heater, remove the boiler drain and go up in the bottom of the tank with a wood or plastic rod, (not metal) and try to break up the mineral and flush it out. Good luck, TOM
    mrpubbs's Avatar
    mrpubbs Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Mar 14, 2007, 06:22 PM
    The hot water pressure(cold is fine) throughout my house except for the washer and basement faucet has decreased to just a little more than a trickle and is taking forever become hot. I live in an old house and my husband is thinking that we will need to put in all new plumbing. What can we do to try to solve this situation that is not so drastic? Please help I’m really tried of taking cold showers!
    beauddcobb's Avatar
    beauddcobb Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Nov 17, 2007, 08:13 PM
    Comment on speedball1's post
    Just what I was looking for! Thanks! D
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #5

    Nov 18, 2007, 05:24 AM
    Quote Originally Posted by mrpubbs
    The hot water pressure(cold is fine) throughout my house except for the washer and basement faucet has decreased to just a little more than a trickle and is taking forever become hot. I live in an old house and my husband is thinking that we will need to put in all new plumbing. What can we do to try to solve this situation that is not so drastic? Please help I'm really tried of taking cold showers!
    Do you have older galvanized pipes in your house?
    Before you repipe the house shut the water off to the house and remove the basement faucet. Hold a pail over the open line and turn the water back on to flush out the line. Do the same with the washers hot water. You should have a strong stream coming out of the open pipe. If not then click on back. You might also look at the post above and flush out your water heater. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sudden loss of water pressure [ 6 Answers ]

A couple of days ago I turned on the water at my kitchen sink and it came out with the usual force, but then about 10 seconds later it slowed down considerably. This continues to happen on both the cold and hot water, but I have not seen this happen at any of the other faucets in the house. ...

Loss of water pressure [ 3 Answers ]

Here's the deal: Have seen a slow but sure loss of hot water pressure in the five plus years we have been in the house. Water source is a well, so lime and minerals are likely to blame. Pipes are copper. Water is heated through the furnace, a Smith (Westcast) 8 Series boiler-burner unit. We...

Loss of water pressure [ 1 Answers ]

Hello, I realize this question has been asked before but the proposed solutions have not corrected my problem. I have recenly renovated my kitchen and have added an island which includes my sink and dishwasher. After the plumbing had been connected, I noticed a considerable reduction in the...

Loss of pressure with hot water [ 2 Answers ]

I am not sure what model number shower we have, but we built our house in 1985 and the shower says Château by Moen. Earlier this morning about 3 hours ago, the shower worked as it usually does, however now, the only water pressure we have going to the shower head and to the faucet to fill the tub,...

Loss of Water Pressure [ 7 Answers ]

Our house is on a slab. We have copper pipes. Just recently and rather abruptly we began to lose water pressure. When we turn on the shower the water pours out for about 10 seconds and then drops off to a near trickle. We have not changed or added any fixtures. The showers are both single handle...

View more questions Search