Ask Experts Questions for FREE Help !
Ask
    OBrienP23's Avatar
    OBrienP23 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 21, 2012, 05:50 AM
    Where are the safety switches in 917.255913
    I have a Craftsman 917.255913 18HP Garden Tractor. I went to start it this morning and nothing happens. Literally when you turn the key nothing. Not even a click. I checked the battery, fully charged. I put a jumper between the two large terminals on the solenoid and it fired right up. I thought maybe a safety switch so I jostled everything around. I dropped the deck and raised it again and it actually started. So I thought maybe the safety switch on the deck but I can't get it to start no matter how much I mess with the deck. Any suggestions? Wondering if a wire is just loose but it would help if I knew where the safety switch on this mower was.

Check out some similar questions!

How to bypass safety switches [ 1 Answers ]

I'm looking to bypass the parking safety switch, and the blades safety switch? Can anyone help? Marty

Jumper safety switches [ 3 Answers ]

How do I jumper the brake satety and seat swith? Thanks

L 110 Safety Switches [ 2 Answers ]

How can I disable the safety switch in my seat?

Murray safety switches [ 2 Answers ]

Murray 12 hp 30" rider model # 30577x8a I have brand new solinoid and ignition switch, and cleaned the ign switch wiring harness. Still nothing when key is turned. Battery is fine. Must be safety switches? How do I get to each and either fix or bypass them? Pictures would be nice. Thanks.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.