 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor breeze fans customer service
I am in the process of replacing a ceiling fan with a Harbor Breeze ceiling fan on a cathedral ceiling. I have the bracket mounted on the ceiling, when I hang the Ball joint in the bracket it pinches slightly and will not allow the fan to hang plumb. When I reverse the bracket the fan will hang plumb, but now the cover plate pinches the ball joint. Is there a different bracket and cover plate that I should be using or do I need to take the tin snips to the cover plate?
Alex |
||||
Check out some similar questions!
Where can I get the screws that affix the blade arms to the unit? I tried Lowe's where I purchased the fan.
Someone wired a ceiling fan diret and went around the switch. I need to know how to make it go faster because it goes very slow.
It came with a remote. I purchased a spare remote, and a wall unit. The thing is, even though the dip switches are ALL set EXACTLY the same, I can never get more than ONE of the controls to work! If I install the transmitter from the original remote, that one works, if I install the...
Had the fan installed correctly, used it for a year so far, one day stopped spinning and lighting. Had a meter on the electrical outlets all work fine. Is there a fuse in the fan itself, or do I have to get back in there and check wiring?
I have a harbor breeze fan w/a downlight. Separately installed remote. Worked fine until I used the reverse switch. Now the fan won't start and the light won't go on. Any suggestions MartinG
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
