Ask Experts Questions for FREE Help !
Ask
    slopesidewv's Avatar
    slopesidewv Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 27, 2007, 10:05 PM
    Multiple switches
    I am working with a bathroom light above the sink and a fan light combination. It has a hot wire to a junction box. How do I wire it? Trying to replace what was there but in moving the box the switch does not turn off.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Feb 28, 2007, 03:02 AM
    Here are a couple of wiring diagrams that may get you started. See if any are similar to your situation. If not get back with more detail.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Three way switches [ 1 Answers ]

I am trying to wire three way switches with multiple light between them. I have 12/2 from the panel to the first switch then 12/3 through all the lights. At the last light I switched the common and neutral to supply power to the end switch. From the first switch I can control all lights (5...

3 way switches [ 2 Answers ]

I have a light on the ceiling and two switches each at opposite sides of the room to control the light. The switches have worked fine for 20 some years but now the one switch when off will not let the other switch turn the light on. I have replaced both switches but still have the same problem. Any...

Wiring for multiple light switches [ 3 Answers ]

I have three light switches that control one light fixture. In the past, they all turned the light of and on independently. But recently it depends on where you turn if off. In some cases, it won't turn on at another switch. Someone told me it was the wiring or the switches. Nobody has changed...

Switches [ 1 Answers ]

I have a lite at the top of the stairs with one switch for it at the top. I want to and a secong switch at the bottom of the stairs. I believe the incoming power it at the switch (top of stairs) How do I add a second swich to control lite?

View more questions Search