 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My cal spa
Hello ew have a CAL SPA (don't know the model #)from around 2004. It stopped heating, so we went to a spa repair shop and they sold us a new heating element and a little switch of some sort on top of the heating element with 2 wire connections. I removed all the old parts and replaced them with new ones. The pumps work, I did flush the entire system and the digital display seems to allow me to raise the temp... however it does not heat beyond around 75 degrees or so... Any guidance is appreciated. Please e-mail me at [email protected]
|
||||
Check out some similar questions!
Hi I have a Cal Spa. I do not know the model though, but we have had it since 1999. Recently the hot tub has not been heating up. The pump will run, but the heater will not turn on. The heating light on the digital screen is not on even though I adjust the temperature. I have been looking up...
Hi, I have a 2004ish used calspa. The gfci tripped and keeps tripping. I cleaned the wire terminals and installed a new gfci breaker, unplugged the spa pack inputs one by one and it still tripped. So I opened the spa pack and removed the heater leads from the terminals and the gfci does NOT trip...
Ok here is where I stand with this unit. I have 240 volts at the heating coils, pressure switch checks out, turns on and off as it should. The issue is that the light that indicates heat isn't coming on. I know the tub heats up some what but it doesn't get hot, nor does the indicator light come on....
I have a cal spa Model PS2-F I was needing to know if there is a manual I can download somewhere for it! And I also need to know if this type of motor is just one speed or if it is two speeds?
I have a 1999 cal spa just got it and got it up and running tonight. The pump runs fine but the only time the heater light is on is when the pump is running is that normal?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
