Ask Experts Questions for FREE Help !
Ask
    GlenBrito's Avatar
    GlenBrito Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 24, 2007, 05:06 PM
    Dodge Durango 2003
    I just changed the spark plugs in my Durango. Is there anything I have to to to the truck after I change the spark plugs? Let me know.. Thanks
    PalmettoFinesse's Avatar
    PalmettoFinesse Posts: 14, Reputation: 0
    New Member
     
    #2

    Dec 3, 2008, 05:59 PM

    No there's nothing you have to do

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2000 Dodge Durango w/code p0320 and p0700 [ 2 Answers ]

My Dodge Durango recently has been occasionally not starting and sometimes it bucks while driving. The codes are p0320 and p0700. I looked these codes up and found the p0320 was crankshaft position sensor reference signal can not be found while the engine is cranking. And from what I've seen for...

Mark up on new vehicles specific Dodge Durango [ 2 Answers ]

Good morning, I am trying to find out what the average mark up is on a new Dodge Durango

2001 Dodge Durango overheating [ 3 Answers ]

Auxiliary heating pump went bad. Durango overheated. Had it towed and the pump was replaced. I drove it home and it overheated again. Checked the reservoir and there was no circulation of fluid in reservoir and the fluid in the reservoir was cold! Heater hose from top of radiator was warm to...


View more questions Search