Check out some similar questions!
Tapping into ABS Pipe
[ 1 Answers ]
Under the basement concrete floor is a 4 Inch diameter ABS sewer pipe. I am renovating and would like to add a 1 1/4 inch ABS sink drain to it. I can only access the top of the pipe. Is there any way to do this?
Tapping into pvc pipe
[ 1 Answers ]
I can't get into a close space around a pvc pipe to place new fittings but would like to 'tap' into the existing 2" line, is there a solid method?
Tapping into 2" copper pipe
[ 5 Answers ]
In my basement, I'm putting in two laundry hookups. There is already a 2" copper pipe tapped into a stack that runs the length of the room, about 24'. There is one copper T (2", 1.5", 2") already welded into the 2" drain pipe and has a trap with 1.5" standpipe. I want to add a 2" along the same...
Very small leak at solder joint of hot water pipe
[ 1 Answers ]
Hi there, I am concerned about a small leak (very small drip) at a solder joint of a hot water pipe. Should I have a plumber come and re-solder the joint or is there a produce I can purchase that will safely stop the leak. Thank you in advance for your assistance,
Tapping in new drain pipe to old sewer pipe
[ 2 Answers ]
I want to install a new tub and shower in my basement. The old shower in the basement drained through a pvc pipe that ran on top of the basement floor directly to our floor drain. I have excavated a channel from the proposed tub site to the sewer pipe running from the first floor toilet to the... View more questions Search
Add your answer here.
|