Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
GFCI neutral bar/pigtail question for hot tub
[ 1 Answers ]
I have a 240 volt hot tub (4 wire) and it's wired in a spa pack to a GE 50 AMP GFCI breaker. An electrician did the wiring and connected both the hot tub neutral and the gfci pigtail to the neutral bar instead of to the neutral of the gfci breaker. According to everything I've read here the GFCI...
Gfci hookup without a neutral
[ 1 Answers ]
I have a spa that has 2 hot wires and 1 ground # 6 wire size,how do I hook up a GFCI breaker to it if it does not have a neutral.
220 Volt GFCI Operation without Neutral
[ 5 Answers ]
I am installing a 220-volt circuit consisting of two (2) #6 conductors and a #10 ground via rigid conduit to a 50-amp Hot Tub. I have also run a bonding wire to the load center which is within 5-feet of the hot tub. Inside the load center the neutral and ground have been bonded. I didn't run a...
Open neutral on gfci and 1 other outlet
[ 2 Answers ]
I have a GFCI outlet that wires to another outlet and both outlets have stopped working and I'm getting an open neutral indication at both oulets. The outlets are on the same circuit as a double wall switch one of which is a 2 way(turn off or on from different locations). The switches work fine... View more questions Search
|