Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Size of wire 100 amp garage service?
[ 1 Answers ]
I will actually be using less than 60 amps but the box has 100 amp breakers and rating. Do I need to go to a larger gauge simply because of the larger breakers or can I go smaller as for a 60 amp usage? I have a small compressor; 50 amp welder; may install a motorized garage door as a manual is...
What size wire and what breaker for a 100 amp sub panel 275 ft
[ 2 Answers ]
"I have a 200 amp panel in my house with 7 avalible slots. I want to run from it to a 100 amp sub panel 275 ft away. What size wire and what size breakers should I run to the sub panel? Then from the panel I was going to run in the barn 3 shop lights and 4 plugs. Then go about 75 ft to a pavilion...
Wire size for a 100 amp lug sub panel
[ 4 Answers ]
Hi I have a 200 amp main panel, but it is a small 24 slot panel. It is full and I need to add three more circuits. I want to run a 100 amp main lug subpanel. The plan is to move the clothes dryer breakers to the new sub and use the existing location in the main panel to install a 100amp breaker...
Wire size for a 100 amp sub panel 200 feet away
[ 8 Answers ]
I have a 200 amp main panel in my house and I just built a garage and am planning on putting a 100 amp sub panel in the garage. The garage is about 200 feet from my house and it has a 2 inch pvc stubbed out underground. I am wondering what size aluminum I would need to feed it, and if I can use a...
100 amp sub panel wire size
[ 2 Answers ]
I now have the 100 amp breaker installed in my load panel. I will run wiring from the load panel to a 100 amp sub-panel in an unground 80 schedule PVC. I believe I need to use #2 wire for the hots and the neutral. If this is correct, then what size ground do I use? Number 6? The sub- panel... View more questions Search
|