Ask Experts Questions for FREE Help !
Ask
    cpulley's Avatar
    cpulley Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 27, 2011, 05:59 PM
    Armstrong air ultra 80 V 45647-001, lighting then shutting off
    Hello,
    I have an armstrong air ultra 80 V 45647-001, I'm having an issue with the top motor staring burners igniting and staying lit for roughly a minute then the unit shuts down usually without the bottom blower motor kicking on. I have left the fan on constant to help keep the unit cooled down thinking it was an overheating issue. I changed the thermostat (honeywell)a few days ago and put it on auto and it worked fine until recently (I'm a new homeowner and have only had the house a couple of months and this is a nagging problem). Should I just break down and call the experts? I take pride in fixing things myself however have little HVAC experience. Any help would be greatly appreciated.
    Thank You
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Dec 27, 2011, 06:55 PM
    U might try cleaning the flame senser, use fine steel wool

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Armstrong air ultra sx 80e furnace [ 0 Answers ]

The flashing light says "limit switch open". I have cleaned the filters but the light still flashes 4 times. What do I do now?

What size filter does the armstrong air ultra 80 sx use? [ 0 Answers ]

What size filter does the armstrong air ultra 80 use?

Armstrong air ultra sx 80 furnace [ 7 Answers ]

I have an Armstrong Air Ultra sx 80 model# GUJ075D10-2B. The furnace has satisfied the call for heat and everything has shut off and waiting for the next call. The problem is on the start-up. When the igniter starts the flame, it is like there is a small build up of gas in the heat exchanger and...


View more questions Search