Ask Experts Questions for FREE Help !
Ask
    Oneill474's Avatar
    Oneill474 Posts: 427, Reputation: 2
    Full Member
    		  
    #1

    Dec 27, 2011, 07:09 AM
    Washing Machine will not fill
    The 2009 purchased Kenmore occasionally has trouble filling. The water drains out. You must
    Restart the machine then it works okay. Seems like a valve is going bad?
    Any ideas?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Dec 28, 2011, 07:08 AM
    Check the screen on the inlet of the water valves on back of machine, then check other end of hoses to see if there are screens there, too. This is common for them to stop up.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE washing machine (149.0)--use with manual water fill [ 1 Answers ]

Live with a cistern and am trying washing machine without water hookups---haul water to put in the top. Cannot get the start cycle triggered even with knobs in right place and can hear sound of electricity turned on (will shoot the water OUT if go to THAT part of cycle, but will not begin...

Washing machine on final rinse takes for ever to fill water up. [ 1 Answers ]

Fridgidaire Washing machine on final rinse takes forever to fill up with water. It only happens on the final rinse, it takes 45 minutes to an hour. Any one have a clue, or do I need to reset something on this unit.

Washing Machine Overflow at Fill stage [ 4 Answers ]

I have a washing machine that doesn't shut off and completely overflows. Is there some kind of sensor that doesn't work or is this something that I could fix myself. It drains fine at the spin cycle. Any help is greatly appreciated.

Question about washing machine fill cycle [ 1 Answers ]

I have a question about how the washing machine works. When the washer is filling with water and someone in the house turns on a faucet, I see a big decrease in the flow of water into the washer. I know the cycles are on a timer, so does that mean that the water in the washer will be less when it...

Whirlpool washing machine won't fill [ 1 Answers ]

When starting the washing cycle, the water enters but it keeps getting pumped out and I can hear what sounds like the pump. The stand pipe is above the machine so I don't think that's the problem. Thanks

View more questions Search