Ask Experts Questions for FREE Help !
Ask
    AlexFalk's Avatar
    AlexFalk Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 16, 2011, 12:10 PM
    What materials should I use for making a model of a venus fly trap?
    I'm doing this for school project and I am a bit stumped.

Check out some similar questions!

Leaky condenser trap in Buderus Model GB-142-30 [ 4 Answers ]

To correct my earlier, apparently inaccurate request, I need to know how often leaks from a Boderus gas powered boiler system occur because of a failed condenser trap. The technician who repaired ours knows of at least one other in the area, but ours was the first Buderus boiler system installed...

Shower vent moth fly drainage trap [ 3 Answers ]

We have had little black drainage flies in our bathroom for quite sometime, the master shower which is lined with ceramic tile. People come to clean once every 2 weeks. I have poured bleach and Draino down the drain, but the flies keep coming back. I plan to try this Orange Citrus Drain and...

How can I check the lent trap on a General Electric Model #WWSR3090TAWW [ 0 Answers ]

How can I check the lent trap on a General Electric Model #WWSR3090TAWW?

Making a Lead Balloon Fly [ 2 Answers ]

So Im a little lost on how to start looking for a solution here... Given that you have a spherical balloon made of lead with the shell being .1mm thick. And filled with Helium. What is the volume required for it to float? P=10^5Pa T=300K

Venus Fly Trap? [ 2 Answers ]

Can venus fly traps really grow large enough 2 eat a small rat?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.