Ask Experts Questions for FREE Help !
Ask
    cjwilburn's Avatar
    cjwilburn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2011, 08:05 PM
    I have a 4 ton rued heat pump with auxiliary gas heat pump quits working
    I have a 4 ton ruud heat pump with gas pack the heat pump quits when it gets 39F outside and furnice kicks in but does not ignite and I smell no gas what could it be
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Nov 30, 2011, 05:21 AM
    Could be igniter
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Will a 3 ton compressor work with a 3.5 ton heat pump [ 1 Answers ]

My heatpump compressor might be locked down are wires inside burnt can a 3 ton compressor be used in this unit it's a 2006 model I had it a year

2008 4 ton Goodman heat pump doesn't switch into electric strip heat? [ 18 Answers ]

OK even when its 17*F out I can still here it running at night. So is this a problem? I mean it runs non stop.

My Trane Auxiliary heat on heat pump is tripping breakers. I think all 3 elements are g [ 0 Answers ]

All 3 white control wires on 3 contactors to elements gets energized at the same time even when only calling for 2-3 degrees increase. Is that normal? I thought it was setup to increase elements based upon the amount of heat called for? The point is breakers keep tripping in winter for the last...

Gas Furnace not working with installation of Heat Pump [ 3 Answers ]

My AC unit went bad this summer. The HVAC guy talked me into a Heat Pump (Goodman). The ac worked fine this summer. I began to use the heat pump for heat this fall and it worked great Now the Temp is 35 degrees and I set the thermostat to emergency heat. The gas furnace will blow but no heat comes...

View more questions Search