Ask Experts Questions for FREE Help !
Ask
    econoline5065's Avatar
    econoline5065 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2011, 05:49 AM
    Regarding 1997 Cal spa heating
    Hi Chaosmaster1,
    Thanks for your answer. The only error code is the flashing Flo, but I think it has always flashed this. I have water runnning through the heating tube and not air locks anywhere. Would it benefit me to install a new Temp. sensor? Also could you tell me how to test the current heating element so if bad, I can order another.
    Thanks again for your help.
    Ron
    Dr_Spa's Avatar
    Dr_Spa Posts: 101, Reputation: 13
    Junior Member
    		  
    #2

    Nov 15, 2011, 07:44 AM
    Flo indicates that the system thinks there's not enough water flowing to activate the heater. Have you properly adjusted the pressure switch you installed?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cal Spa not heating [ 27 Answers ]

Hi I have a Cal Spa. I do not know the model though, but we have had it since 1999. Recently the hot tub has not been heating up. The pump will run, but the heater will not turn on. The heating light on the digital screen is not on even though I adjust the temperature. I have been looking up...

1997 cal spa 3000 not heating [ 2 Answers ]

Hi I have a 1997 cal spa. I have installed a new 2 speed motor, new heating element, new pressure switch and a new filter. Last year, no problems but this year cannot get it to heat up. Heat light will not come on no matter what I do. I will add that near the end of last year it was touch and go on...

PS2-F cal spa [ 0 Answers ]

I have a cal spa Model PS2-F I was needing to know if there is a manual I can download somewhere for it! And I also need to know if this type of motor is just one speed or if it is two speeds?

Cal spa heater [ 0 Answers ]

I have a 1999 cal spa just got it and got it up and running tonight. The pump runs fine but the only time the heater light is on is when the pump is running is that normal?

Any hints on moving a cal spa ps-2? [ 0 Answers ]

I am moving a cal spa PS-2. I don't have a manual and think I need to remove the pump and heater. Any pointers? Thanks, jim

View more questions Search