Ask Experts Questions for FREE Help !
Ask
    rick2's Avatar
    rick2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2011, 07:19 AM
    We are adding a breaker box in a barn the wire we ran from the pole breaker box
    The wire is 2 ft short and the box will be too low... can I splice another piece to it? And how do I do it
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 12, 2011, 07:22 AM
    First tell us more about the wire size, gauge and what load will be on this panel. Does it stop short outside the barn or inside just short of the pole you want to use?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ground wire to neutral bus connection in breaker box? [ 5 Answers ]

In preparation of wiring a hot tub I took off my breaker box panel face plate and noticed that the 8-2 w/g white romex coming into my breaker box had the bare ground wire connected to the neutral bus. The other two hot wires go to the 30 amp breaker. This romex comes from my air cond compressor...

Replace a two pole breaker in main panel box [ 1 Answers ]

I need two replace a bad two pole breaker in main panel boxwhat tools do I need

Baement Subpanel : Breaker, Box, and Wire [ 1 Answers ]

I'm running a new basement - 6 circuits 15 amp each (lights & outlets) and am going to run a subpanel in the basement from the main in the garage. Am I correct in the following: 1. 55 amp breaker in the main s to a 125 amp panel will be okay 2. Get wire rated for 55 amp (is this 6-2 I think...

View more questions Search