Ask Experts Questions for FREE Help !
Ask
    barrymbrwn's Avatar
    barrymbrwn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2007, 05:12 PM
    Water not completely empting from rinse cycle
    Whirlpool washer about 3 years old is not takeing all the water out of the machine during the rinse and spin cycle. Could something be stuck in the pump housing ? What could be the cause .
    Ozarks's Avatar
    Ozarks Posts: 6, Reputation: 0
    New Member
    		  
    #2

    Feb 11, 2007, 01:29 PM
    Quote Originally Posted by barrymbrwn
    Whirlpool washer about 3 years old is not takeing all the water out of the machine during the rinse and spin cycle. Could something be stuck in the pump housing ? what could be the cause .
    Check out repairclinic.com
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer Won't Fill on Rinse Cycle [ 2 Answers ]

Everything else is working fine, it fills normal on wash, but not rinse, no matter what cycle such as perm press, ultraclean.

Rinse cycle not operating correctly [ 1 Answers ]

The washing machine is a whirlpool about 12 yrs old. When it gets to the rinse cycle, the water only trickles out. What would keep water from flowing in at the beginning of the rinse cycle. The water supply hoses are new, so I'd appreciate any insight into this problem.

Maytag washer: drain pipe overflows during rinse cycle HELP! [ 2 Answers ]

:eek: I have a new Maytag washer. (top load). During the drain cycle I hear the water pumping out but then the water comes back and will overflow at the top of the pipe and on the floor. The old washer did not have this problem. We used a snake, draino etc etc. in the pipe. Sometimes it will NOT...

Washer in basement backing up on rinse cycle [ 1 Answers ]

Moved into a house recently. Finally really happy to have a washer. On the rinse cycle it overflows onto the basement floor through the vent in the floor. Maintenance guy came over today and says it is probably lint clogging the line. He pours a quart of lime into the pipe that the washer drains...

View more questions Search