Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace Limit Switch
[ 15 Answers ]
I've raised this issue in other forums. I have a high efficiency furnace that has worked flawlessly for the last four years (the house was built in 2000). This year we had to have the circuit board replaced. After that there was a problem with the blower, i.e. it wasn't shutting down after the...
Help Replacing Carrier Circuit Board HK42FZ004
[ 2 Answers ]
I have a Carrier gas furnace that is not getting gas; the rest of the cycle runs properly, including the HSI glowing, but there is no gas to light, so the system shuts down and I get a 21 error code (gas lockdown). I am showing no voltage to the gas valve at the point in the cycle when control...
Carrier Ignition Lockout Code & Ignitor Problem
[ 3 Answers ]
The code I'm getting is 14 for ignition lockout, will reset in 3 hrs. The furnace tries to ignite 3 or 4 times and then the code trips and shuts the furnace down. I usually just flip the manual switch to get it going again but if I'm not home to pay attention or if we're asleep the house will...
Carrier Gas pack circuit board part #
[ 3 Answers ]
Can anyone suggest/cross-reference the part number for my circuit board? The model number for the unit is 48SS018-060. Thanks. View more questions Search
|