Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honeywell MagicStat 32 - Model CT3200
[ 9 Answers ]
Hi, I have a Honeywell Thermostat MagicStat/32 which is saying (not Flashing) "bat low." As per the instruction manual, I changed the Batteries. This did not clear the screen. I tried another set of new Batteries, which again did not clear the screen. I am sure I put them In correctly. ...
Honeywell magicstat 28 troubleshooting?
[ 3 Answers ]
My thermostat's fan will not turn off. Do you have any suggestions?
Is the Honeywell MagicStat/32 thermostat a two stage?
[ 0 Answers ]
I have 2 stage central air unit plus the gas forced air furnace. I'm not sure this MagicStat/32 will control the two stages of air conditioning.
Honeywell magicstat manual
[ 1 Answers ]
My Honeywell MagicStat thermostat indicates 'system on', but my furnace is not on and the current temperature in my house is 10 cooler than what I have programmed it to be (during the heating season). I have found turning the thermostat to 'off' and then back to 'auto' gets the furnace to start,...
Honeywell MagicStat/32 or Furnace Failure?
[ 4 Answers ]
I've changed the batteries on the thermostat when the "lo bat" message displayed. Per the user manual, I had to install the batteries backwards for 10 seconds in order to reset the unit. I then reinstalled the batteries in the proper manner and began to program the unit. Approximately 20 seconds... View more questions Search
|