[lvexpat]

I need to know the correct drill bit to use for porcelain tile.I bought a black & decker glass & tile drilling set and it wore completely before I was even 1/8" in. I've been to home depot & lowe's and am told this is the only one available. Surely this can't be true. Any help will be greatly appreciated

[Dean1]

I need to know the correct drill bit to use for porcelain tile.I bought a black & decker glass & tile drilling set and it wore completely before I was even 1/8" in. I've been to home depot & lowe's and am told this is the only one available. Surely this can't be true. Any help will be greatly appreciated

sears hard ware has a drill bit that will drill hardened steel or tile or granet just pay mind to the RPM's of the drill the bit is called a cobalt& tungsten carbide tip. #01020 is a 3/16th bit but they have bigger ones

[Dean1]

I need to know the correct drill bit to use for porcelain tile.I bought a black & decker glass & tile drilling set and it wore completely before I was even 1/8" in. I've been to home depot & lowe's and am told this is the only one available. Surely this can't be true. Any help will be greatly appreciated

Sear hardware has what you need cobalt&tungsten carbide tip drill bits #01020 is 3/16th bit but they have others

[lvexpat]

I need to know the correct drill bit to use for porcelain tile.I bought a black & decker glass & tile drilling set and it wore completely before I was even 1/8" in. I've been to home depot & lowe's and am told this is the only one available. Surely this can't be true. Any help will be greatly appreciated

To Dean1-Thanx for your help. It did the job easily. lvexpat

[TILEEZE]

I need to know the correct drill bit to use for porcelain tile.I bought a black & decker glass & tile drilling set and it wore completely before I was even 1/8" in. I've been to home depot & lowe's and am told this is the only one available. Surely this can't be true. Any help will be greatly appreciated

Go to TILE-EZE Keramik Drill Bits, Ceramic Tile Drill Bits, and Glass Drill Bits it works !

[artz]

sears hard ware has a drill bit that will drill hardened steel or tile or granet just pay mind to the RPM's of the drill the bit is called a cobalt& tungsten carbide tip. #01020 is a 3/16th bit but they have bigger ones

Sears store in Phoenix doesn't carry. Sears computer says no number like #01020. Any suggestion on another number. I do need a 3/16 bit for porcelain. Had the same experience with the "spade" type bits from HD and Loew's.

[TILEEZE]

sears hard ware has a drill bit that will drill hardened steel or tile or granet just pay mind to the RPM's of the drill the bit is called a cobalt& tungsten carbide tip. #01020 is a 3/16th bit but they have bigger ones

Go to the website and learn about the Keramik Drill bit.
Porcelain Drill Bits, Ceramic Tile Drill Bits, Glass Drill Bits
KEIL comp in Germany has developed this bit for porcelain tile
It works

[ballengerb1]

Gee I thought it was just me, I wrecked 4 of those B&D glass bits. Sometimes they heated up so quick the tip came unwelded from the shaft. Guess this is an example of a good name gone bad. I use carbide Remington cutters for small holes like a shower supply. They work even better if you lay the tile inabout 1/8" of water.

[TILEEZE]

Go to the website and learn about the Keramik Drill bit.
Porcelain Drill Bits, Ceramic Tile Drill Bits, Glass Drill Bits
KEIL comp in Germany has developed this bit for porcelain tile

[the1unv]

I use a regular massonary bit in a cordless drill. If you have problems use an 1/8" bit first. I will never buy another $7.00 glass and tile bit again.
Mike

[ballengerb1]

the1unv, we must be thinking of different materials. A masonry bit will barely scratch a porcelain tile. The B&D glass bits do suck so I will never buy them again.

[the1unv]

I am talking about porcelain tile, it may take a bit longer to drill the hole but the bit will last much,much longer.
Mike

PS. To make it easier to start the hole I use a "spring punch" where I want the hole. It will chip the finish off the porcelain with out cracking the tile... makes it easier to drill... In My Opinion !

[vicindy]

Thanks, the1unv. I used a 3/8" masonry bit for the pilot hole and then the larger bit for the size I needed. Worked like a charm!

[bseeger]

Tapcon drill bit works nice. Low speed and tak your time.