Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan not working correctly after replacing 3 speed pull chain switch
[ 0 Answers ]
Replaced the pull chain switch but it is only going to High/Low speeds.. won't shut off. Guessing I have the wiring wrong but I have different color wires then most other post. Any help would be appreciated. My fan has Black, Red, White and Yellow wires to be placed into the switch.
Wall switch not working ceiling fan with remote
[ 1 Answers ]
Thanks for quick response but the light and fan work perfectly with remote control but now the wall dimmer switch will not turn on the light.
Fan switch on hunter ceiling fan model #20537 not working.
[ 1 Answers ]
The fan switch on my hunter ceiling fan model #20537 is not working. What colored wires are supposed to go into the switch, and at what position on the switch? I have 3 wires, green, brown and gray. The switch has 4 slots, 3 L 2 1
New ceiling fan switch not working
[ 2 Answers ]
During a remodel I moved light/fan switchs from one side of the door to the other. I had a double gang box with 2 single pole switchs and now have single gang with single pole double switch. I have a tried the old wiring configuration with the new single gang double switch and it blowes the breaker...
Remote for Hamton Bay Ceiling Fan not working - no wall or chain switch
[ 4 Answers ]
I have changed the batteries in the remote, checked to make sure the toggle switches are in the same position in the remote and on the fan, checked the electrical switches and still neither the fan nor the light will come on. Any suggestions on what to do next before just replacing the remote? View more questions Search
|