Ask Experts Questions for FREE Help !
Ask
    shelleythepoet's Avatar
    shelleythepoet Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2007, 04:54 PM
    Kenmore elite dryer
    My kenmore elite dryer is not getting hot what could be the problem? I was thinking it may be the heating coil, if so where would it be located? Any other suggestions?
    jake4's Avatar
    jake4 Posts: 29, Reputation: 1
    New Member
    		  
    #2

    Mar 5, 2007, 09:00 PM
    Might need water valve, check screens in hoses first and in the valve , where the hoses screw on
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #3

    Mar 24, 2007, 10:52 PM
    KENMORE WASHER AND DRYER
    Epinions.com - Posts in Sears Kenmore Elite Dryer Won't Run If Start Button Released
    wkimbel's Avatar
    wkimbel Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Mar 25, 2007, 09:35 AM
    Quote Originally Posted by jake4
    might need water valve, check screens in hoses first and in the valve , where the hoses screw on
    Jake, just reading through this string - My dryer does not have any water valves (nor, hopefully, any water!)

    Did your response belong with a different question?
    BK
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #5

    Mar 25, 2007, 12:07 PM
    That string covers all kenmore stuff. Scroll till you get to yours.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite Dryer - [ 3 Answers ]

My kenmore dryer starts the drying cycle then after about 2 - 5 minutes shuts off. It will restart after about 30 minutes. I have checked the thermal cut offs hi limit thermostats, etc. Any suggestions?

Kenmore Elite dryer [ 1 Answers ]

I have a Kenmore Elite dryer that is 7 yrs old. There is a panel on the front bottom of the dryer. When the dryer is opened to remove clothes there is a removable filter that slips into that bottom panel that must be cleaned after every use. The dryer is not drying well, which leads me to...

Kenmore Elite Dryer [ 3 Answers ]

From time to time, I am able to select my drying selections, load size and all the settings but when I push START it only "clicks" and will not start. Then the next day, it is like it "resets" itself and works fine. There seems to be no reason when or why this occurs. Is there any reason why...

View more questions Search