Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heat Pump - Payne
[ 4 Answers ]
Hi. I sent a request to Carrier regarding my question but they want to send a service rep. instead of answering my question. I have a one year old heat pump that was added to my medium efficiency furnace. I live in Canada, West Coast, and the heat pump will now not continually provide cool air. It...
Heat Pump not working... Payne Model PH10JA030-E
[ 1 Answers ]
My heat pump had been running for approx 2 weeks, when I arrived home one evening to find that it was cold in the house. The thermostat display was off (no batteries in this one). Thermostat replaced and heat pump still not working. Fuse was blown. Once fuse was replaced, heat came on and ran...
We have a 2 year old rudd heat pump and the outside fan isn't working
[ 0 Answers ]
Our inside unit runs but the fan outside isn't turning. Also of course the house warms up when the auxiliary heat is turned on. Our HVAC guy said it may have been tripped, but my husband looked on the exterior unit and doesn't see a reset switch or fuse?
6 year old Payne Heat Pump compressor failed
[ 1 Answers ]
The compressor on my 6 year old Payne Heat pump failed. The HVAC guy offered 3 solutions. 1. replace compressor - cost $1100 -$1300 2. replace whole outside unit - cost $2500 3. replace everything with new, more efficient unit cost: $7k+ It is Payne model PH10 2.5 ton R22. HVAC guy...
Payne heat pump -- will not run
[ 2 Answers ]
Help! My problem started with the compressor not running with the heat switch on. I checked the thermostat wiring and found that the tstat was not wired per the manual for a heat pump with aux heat. I fixed that problem and the unit would run but not blow warm air. I called out a technician and... View more questions Search
|