Ask Experts Questions for FREE Help !
Ask
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #1

    May 7, 2011, 02:07 AM
    find the Edge (geometry) and the Volume of Unit cell
    the question syas: if the radios of Niobium is 1.43 Ångström what will be the length Edge and what will be the Volume of Unit cell, if is know that Niobium has bcc structure.

    what I know is:in bcc structure there 2 atoms.
    so to find the Volume I just need to use this formula:4/3*pi*r^3 when r=1.43*10^-8cm?

    I really need help here.

    thanks.

    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #2

    May 7, 2011, 02:49 AM
    is will be correct if I use this formula d=m/v to find the Volume of Unit cell.
    if I know that the unit cell in this case is bcc so I can find d by this formula:d=(3^3/2M)/(32Nar^3)


    this what I thinking to do:v=m/d when m=xMw/Na when Mw is molar mass, and x is the NO of atoms in unit cell in this case I have 2, and the molar mass of Niobium is 92.91 g mol-1.

    so I get v=(2*92.91 g mol-1/6.022*10^23)/(3^3/2M)/(32Nar^3).

    what are you think this is a correct way to find the Volume of Unit cell,

    sorry about the mess :)
    thanks
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #3

    May 8, 2011, 02:46 AM

    BCC is body centered cube, right? Then, isn't there 5 atoms involved? :confused:

    I never did this chapter, but this seems strange to me...
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #4

    May 8, 2011, 06:03 AM
    Comment on Unknown008's post
    No there is only 2 (NET) atoms that involved in bcc structure.
    And in fcc there are 4 atoms (NET) involved.
    In both I mean number of atoms per unit cell.
    http://www.virginia.edu/bohr/mse209/chapter3.htm
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #5

    May 8, 2011, 09:35 AM

    Okay, if I understand well, the atoms along a diagonal touch each other, but along not along an edge, like this:



    The diagonal in this case is equal to 4 radii, which is 5.72 Ångström (black lines, any one of them). This means that the diagonal along the base is 5.72/\sqrt2 = 4.04 Ångström (that diagonal is the hypotenuse of an isosceles right angled triangle, the triangle formed by the two red lines and one black line I picked). This base is now another hypotenuse of an isosceles right angled triangle, and is equal to 4.04/\sqrt2 = 2.86 Ångström. (in the triangle with blue lines and one red line)

    The volume is then that value to the cubed, which is 23.4 Ångström cube.
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #6

    May 8, 2011, 09:39 AM

    If I understood your site, you could this too:

    Yu use the APF, which would give you:

    Volume of atoms = Ångström cube

    Volume of unit cell = 2.45/0.68 = 36.0 anmstrom cube

    Edge of unit cell = Ångström

    That's quite far =/

    But I guess this is better and shorter, since I'm not sure that the atoms even touch each other.
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #7

    May 8, 2011, 09:57 AM
    Comment on Unknown008's post
    to find a I have to use this formula: a=4r/sqer3 and is give us that a=3.3 Ångström
    now to find the volume because we speak about cube is will be a^3.
    tell me what you think about this way?
    and remember we speak about Volume of Unit cell, :)
    thanks a lot .
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #8

    May 8, 2011, 10:06 AM
    Comment on Unknown008's post
    in the Volume of unit cell=2.45/0.68=36 from where you taken that 0.68?
    I found it by using (3.3)^3 Ångström
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #9

    May 8, 2011, 10:24 AM

    Um... I actually used the Volume to get the length of the Edge in my latest post :o

    And I got 36.0 Ångström.

    But when it comes to your formula, I'm having trouble understanding how

    Density =(3^3/2M) / (32Na r^3)

    Mass = 3^3/2M ?
    Volume = 32 Na r^3 ?

    :confused:
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #10

    May 8, 2011, 10:26 AM

    in the Volume of unit cell=2.45/0.68=36 from where you taken that 0.68?
    I found it by using (3.3)^3 Ångström
    Ooh, I got it from the site you linked me to. For BCC, the APF is 0.68.
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #11

    May 8, 2011, 10:35 AM
    Comment on Unknown008's post
    OK thanks.
    Last thing what do say about my way?
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #12

    May 8, 2011, 10:46 AM

    I don't know where these values come from :(
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #13

    May 8, 2011, 10:49 AM
    Comment on Unknown008's post
    lol forgot about this formula.
    I just speak about the formula for length of the Edge :4r/sqrt3 is give us a
    and for the volume for unit cell =a^3 .
    you can see it in my former post up hree :)
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #14

    May 8, 2011, 11:07 AM
    Comment on Unknown008's post
    "The volume (V) of the unit cell is equal to the cell-edge length (a) cubed."
    http://chemed.chem.purdue.edu/genchem/topicreview/bp/ch13/unitcell.php
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #15

    May 8, 2011, 11:08 AM

    Hm... this very closely reminds me of the one I used, but I honestly don't know :(

    If you get the answer required, then I guess it's fine :)

    Also, the site you gave me said that in the denominator, you have nA, where A is the mass in amu. 92.91 is not in the units of amu as far as I see, since 1 amu is about 12 g/mol
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #16

    May 8, 2011, 11:10 AM
    Comment on Unknown008's post
    Yes I know in this formula I did mistake
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #17

    May 9, 2011, 03:18 AM
    OK I did it but:
    look on the picture I want to calculate it and I get as a result 21.2

    but I know the correct answer is 8.17g/cm^-3

    what you get?


    thank you.
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #18

    May 9, 2011, 03:20 AM
    Comment on pop000's post
    Is speak about Cu with radios 128pm
    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #19

    May 9, 2011, 09:32 AM

    I told you I don't understand your formula at all :(

    Why the , I don't know, why the 32 in the denominator, I don't know :(

    Plus the site you gave me earlier doesn't have it...
    pop000's Avatar
    pop000 Posts: 352, Reputation: 6
    Full Member
     
    #20

    May 10, 2011, 08:18 AM
    Comment on Unknown008's post
    Well this formulas I got in my book.
    But anyway I solve it :)

    Thanks you :)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to find the volume of a hexagonal cell [ 3 Answers ]

How does one measure the volume of a hexagonal cell? For example, a container with one closed end and hexagonal sides measuring four feet wide,(space between any two plane sides of said hexagon) and five feet in depth. How much liquid could a container of this size hold?

Calculate the length of an edge of this unit cell. [ 13 Answers ]

Silver forms face-centered cubic crystals. The atomic radius of a silver atom is 144 pm. Consider the face of a unit cell with the nuclei of the silver atoms at the lattice points. The atoms are in contact along the diagonal. Calculate the length of an edge of this unit cell. I don't...

Find Volume [ 1 Answers ]

I did it! Use Boyle's Law for the following calculation. A sample of gas which occupies a volume of 22.4mL at a pressure of 1.21 atm is subjected to a decrease in pressure of 82mmHg. Calculate new volume. 82mmHgx(1atm/760mmHg)=0.108atm (1.21atm)(22.4mL)=(0.108atm)(xmL) x=251mL correct?

Finding th diagonal of a unit cell [ 5 Answers ]

I have Cs (169pm) and Cl (167pm) how do I calculate the diagonal of the unit cell for CsCl? I'm so lost the only thing I can think to do is have d=2(169)+2(167) so d would equal 672. Is this right or am I having wishful thinking?


View more questions Search