Ask Experts Questions for FREE Help !
Ask
    kl775477's Avatar
    kl775477 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Apr 17, 2011, 01:52 PM
    Do I have a reset switch. On my furnace
    I have a bryant model#395baw036080
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Apr 17, 2011, 08:35 PM
    Are you experiencing a problem, or just curious? There is a draft safeguard switch situated near the flue outlet. It requires manual resetting if tripped, and generally indicates a problem with the flue draft (i.e. blockage, high wind, collapsed chimney liner).
    kl775477's Avatar
    kl775477 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Apr 18, 2011, 05:46 AM
    What does it look like
    kl775477's Avatar
    kl775477 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Apr 18, 2011, 05:49 AM
    I can't get my air or funace to come on. I changed the door switch and motherboard. My breakers got power and door switch.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #5

    Apr 19, 2011, 08:52 PM
    It would resemble one of these.
    Attached Images
      
    kl775477's Avatar
    kl775477 Posts: 4, Reputation: 1
    New Member
    		  
    #6

    May 6, 2011, 01:41 PM
    3 methods of checking a cap tube system for correct charge
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #7

    May 7, 2011, 10:10 PM

    There is 1 method: superheat. Check this out. http://www.hvacsalesandsupply.com/Li...20Charging.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pressure switch open on nordyne furnace can it be reset? [ 0 Answers ]

Reset switch location on a goodman furnace? [ 1 Answers ]

I have a goodman furnace, where is the reset switch on it?

My furnace only works when I reset the pressure switch, what's the prob [ 1 Answers ]

My heater went out last night,when I took the bottom door off,then reinstalled the heat kicked back on for a little bit the kicked back off what could be the problem.

Where is the reset switch for a iceco furnace [ 1 Answers ]

Furnace stopped after we changed the filter. Is there a reset switch

Furnace won't light without a furnace switch reset [ 15 Answers ]

Hello I have a Tempstar/Keeprite furnace model HGF120NE-1, Serial number 8464124770. (the exterior of the furnace has Tempstar logo and interior of furnace has Keeprite logo.) This furnace has an intermittent pilot light system. At times, especially in the morning after allowing a...

View more questions Search