 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York heat pump not defrosting
I have a york heat pump model #E1RA030S06D that will not go in the defrost mode.it is fully charged.I pulled the cover off and noticed the red thero.wire was not connected to the other red wire.I don't know if it come unconnected or not,it looked as though it was connected with a wire nut at one time.will it hurt to reconnect to the larger red wire to see what happens?thanks for any help
|
||||
|
||||
|
I'm a little afraid to answer yes to this question. Installers (in my experience)use what ever wires are available. The red thermostat wire should be 24V from the dual fuel kit or air handler and should go to the 24V terminal of the PC board in the heat pump. The H.P. PC board does need a constant 24V to go into defrost.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My heat pump is cycling every 2 seconds for about an hour first thing in the morning. Why is it doing that? The heat in the house is working fine.
A couple of questions about my 7 month old York YZB02411 with the MV12BN21 air handler, MC30B3XH1 coil and Braeburn 5200 thermostat. First, for this configuration, would you please indicate all of the correct low voltage wiring connections between all units. Secondly, what does it mean when the...
I have a 4 ton York heat pump that just suddenly started making a screaching sound when the heat pump comes on. It makes the noise almost all the time so I turned of the heat pump and have been heating with the emergency heat for the last few days. A repair man told me that probably my compressor...
If we run the fan continually will that make the heat pump not run? Also, how cold does it have to be before the heat pump won't run, it's -5 right now.
I have a older york heat pump that a technician came out to try to repair. He said the board was bad and tried to wire it so that the out side heat pump would run to keep the House cool. Well I found out what had happened to the board (Relay was pulled away from the circuit board from the fan wire...
View more questions Search
|
