Ask Experts Questions for FREE Help !
Ask
    bjrice99's Avatar
    bjrice99 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2011, 02:56 PM
    Beacon Morris BTU 45 won't ignite
    I have a Beacon Morris BTU 45 garage furnace.
    When I turn it on it goes through the process of heating with the exception of no heat.The blower starts up to expel any gas, the ignitor lights up and then the main blower comes on.
    I put a flame to the burners and nothing happened. It seems like there is no gas getting to the furnace. ANy help?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Feb 11, 2011, 08:53 PM
    Dirty burners, no gas pressure or a bad gas valve. If you have gas pressure at the IN on the gas valve and nothing on the OUT with 24v going to the valve it's a bad gas valve. You have to use a manometer to make for sure it's a bad gas valve and not a restricted manifold,burner orifice or just dirty burners. Checking inlet and outlet pressures will let you know if you have a bad valve.
    Theaircoguy's Avatar
    Theaircoguy Posts: 36, Reputation: 0
    Junior Member
    		  
    #3

    Feb 11, 2011, 10:47 PM
    I agree with T-top. Make sure you have gas going to the gas valve and that if it has a switch, that it is in the on position.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Beacon Morris BRU-45, won't ignite [ 2 Answers ]

I have a garage heater, ceiling mounted, Beacon Morris, BRU-45. I am trying to fire it up for the first time this season. Blower comes on, glow plug works, but no ignition.

Beacon morris garage heater? [ 5 Answers ]

After just one winter of use my heater quit working when it calls for gas, gas came on but it would not ignite so I replaced the igniter, still did not work so I called a repair man he told me that the control board was bad so now I have a heater that is two years old that I paid approx 650 dollars...

Installing beacon morris heater bru45 flue pipe [ 1 Answers ]

I am installing a beacon morris bru 45 heater. Looking for some advise on running the flue. Through the wall or the roof. And how to finish off if I go through the wall. Its vinyl siding

Hooking up a Beacon Morris garage heater [ 16 Answers ]

Hello I just purchased a Beacon Morris garage heater. It is a BRU-75. I was wondering if anyone could tell me where I could purchase a thermostat for this particular model. I want to have a switch on the thermostat that will let me shut off the unit when I don't want it to run. I don't want to...

Beacon score [ 3 Answers ]

Although I don't worship the beacon score, I would still like to know what my score is occasionally... does anyone know where you can find your score without having to pay, or do you have to pay to get it?

View more questions Search