How to replace auger belt on a hs920 snowblower

kpclaycomb Posts: 2, Reputation: 1

New Member

Feb 2, 2011, 01:34 PM

How to replace auger belt on a hs920 snowblower

DG Posts: 1,375, Reputation: 109

Ultra Member

Feb 3, 2011, 09:32 PM

Is it a hs920 or a hs928 ?

kpclaycomb Posts: 2, Reputation: 1

New Member

Feb 18, 2011, 01:55 AM

Comment on DG's post

It's a Honda hs920

Add your answer here.

Check out some similar questions!

Shaft on craftsmen snowblower goes fast, but the auger turns very slowly [ 4 Answers ]

My craftsman snowblower drive shaft for the auger, turns fast. However the auger turns very slowly. The tension cord is very tight. What is the problem?

How can I line up the auger and shaft horizontally to replace the shear pin? [ 5 Answers ]

I snapped the shear pin on the left auger of my snowblower. I have no trouble lining the auger and the shaft. My problem is that when they are aligned rotationally, the holes are off slightly horizontally. Enough that I cannot get the remainder of the pin out. There is no play in the auger at all....

Tighten auger belt on 8HP Murray Snow King [ 5 Answers ]

How to tighten auger belt on murray 8 hp snoe king

Snowblower auger coming loose [ 1 Answers ]

My Craftsman 5 HP snow blower has a problem where the auger shaft has come off the auger bearings (the plastic pieces where the auger shaft fit into and are attached to the auger housing). Has anyone had this problem? Do you bang away on the auger housing until it gets narrow enough to hold the...

Snowblower auger belt issue [ 2 Answers ]

I just put on a new belt on the snowblower and now it flips over when engaging the auger and burns. What is wrong?