 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
RCA TV shuts off
I have an RCA and it's only 2yrs old, barely used. All of a sudden it shuts off and on every minute. I don't understand... it's almost brand new. I've read a couple forums where people with an RCA TV that has the same problem as mine. I don't know what to do. I can't even keep it on long enough for me to even change a channel. Any suggestions?
|
||||
|
||||
|
First its not a good idea to piggyback your question on someone else's. This can lead to confusion. You should start a new thread. So I've moved your question to its own thread. Second we need much more info here. Like the model #, type of TV (projection, Plasma, LCD, CRT, etc.) . How do you get your signal (antenna, cable?). Is it just the picture that shuts off or does the power shut off? Do you get any lights flashing on the TV? Have you checked the manual to see if they mean anything? Have you tried RCA to see if they have a tech support #. Is it still under warranty? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We got this TV from my sister about 2 years ago. She didn't want it because she couldn't get any channels on it, just her DVD player & VCR so they unplugged it and left it on their enclosed porch for a few months until we took it. When we got home, we connected it, plugged it in and the channels...
I have an RCA 52 inch TV (D52W19BYX2) that shut off this morning. It started a few months ago with some crackling sounds and eventually the TV would turn off. It would come back on after a minute or so and either do it again or just be fine. It did this for about 2 months and then has been fine...
I recently got a RF p4004 4chan. Amp for my car and I'm looking to hook up a sub or two. My question is how can I hook this up. I have run all my amp wires (Bat. remote, ground) but the only input I have for my amp is a pair of RCA cables. I took an old cable and cut the terminals off one end...
My question is this. I now have my tv2 output on my Bell 9200 receiver connected with 50 ft of inexpensive rca to rca composite video cable to my second TV. The picture on my TV is acceptable but I am not completely satisfied.Would a high quality rca to rca cable or a high quality rca to s-video...
I have a rca 52" mod.# p52754at built in 12/ 1996. The problem is that after warming up the width of the picture expands or gets wider by several inches on each side. It is about the same as my newer TV width in the expand mode. Is this a common problem with a known repair? Don't want to put a lot...
View more questions Search
|
