 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton Bay ceiling fan - light will not dim
I have a Hampton Bay ceiling fan with light and remote. Remote is model TC707ST, but I cannot see model number of fan. Installing contractor a year ago must have discarded manual. This lighted fan has worked perfectly before, but now when I use the remote to turn on and dim the light, it will only turn the light on to maximum intensity. When the light/dimmer button is held down, which should dim the light, it simply turns the light off. Suggestions?
|
||||
|
||||
|
Could be a problem with the remote or receiver. You could try a replacement remote, but the easiest thing might just to be to return the whole thing for a replacement under warranty.
Ceiling fan remote controls - help and FAQ- Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Just installed a Hampton Bay ceiling fan with the remote control for the fan and the light. Old house and I it's my first time installing a fan. Pretty proud and works pretty well. O.K. just a little wobble. After a while of operation, the light comes on without anyone touching the remote. ...
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
We have a wireless Hampton Bay ceiling fan and light with a built in remote receiver. We can still operate the fan with the remote but the lights don't work. The universal remote has one wire for the fan and one wire for the lights but the original system has numerous wires going to the motor. Is...
Can anyone tell me where I can find a replacement bulb for a ceiling fan I purchased at Home Depot a (hampton bay). The bulb is a mini spiral fluorescent with the writing on the side being--PLS13 Warm White, it has 4 pins. And is the push in type. Thanks
I had to take the fan/light down and in doing so don't remember wiring senario that makes the wall switch work the light portion. There are 4 wires coming down from the ceiling of which 2 are still connected. The wiring for the light is still in tact and marked, neutral, light etc. What wires do I...
View more questions Search
|
