Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane gas furnace electric pilot not coming on
[ 0 Answers ]
I cleaned the thermal link below the gas valve to no avail. Valve has no on off control knob. Unit responds to the call but shuts down with lack of ignition response. Gas fumes from vent of burner. Please advise S O P on checking voltage value points on unit. The house has not been lived in for...
Bryant gas furnace starts OK - but blower stops after a few minutes
[ 1 Answers ]
My Bryant gas furnace (394GAD I think) starts up in heating cycle OK - but after a few minutes the blower shuts off. The burners stay on. Then 30 seconds or so later, the blower restarts. After a few minutes, it shuts off again - burners still on - then starts again after 30 seconds. Repeats this...
GAS furnace coming on when its off
[ 2 Answers ]
Gas furnace Keeps cycling on for 30 secs and it is not on -----the thermostat is not on- we are not using heating or a/c
What are 2 red and 2 white wires coming from gas furnace
[ 1 Answers ]
What are 2 red and 2 white wires coming from gas furnace
Heat kick in every hour for 15 minutes in Bryant Plus 90 Gas furnace.
[ 26 Answers ]
Hi All: I have Bryant plus 90 gas furnace and used to have Lenox Mercury thermostat. Heat will kick in for 15~20min after every one hour. Does not follow thermostat. So just change a new Honeywell programmable thermostat, but it is still doing the same. At the furnace LED indicator blinking 3... View more questions Search
|