Check out some similar questions!
Plumbing - I am a complete novice & would kindly like a little advice on flexi pipes
[ 0 Answers ]
I plan to fit a new bath and sink and with the taps attach flexi pipes to the main copper pipes. I plan to use compression flexi pipes but wondered on connecting with the copper pipe do I need to attach anything else, use anything else? - Also should I fit isolator valves as well? Many thanks!
I am building a truss roof over a flat roof.the size is 9'wx9'd.where do I begin this
[ 2 Answers ]
I am building a gable roof over a flat roof at our church.It is 9'wx9'l.How do I determine the height of the center rafter?
Small white pipes protruding from roof - what are they?
[ 5 Answers ]
Hi, looking up at my roof (3 storey building) I can see 4 small white pipes protruding from under the tiling. It looks like they should be feeding into the guttering but they have shifted and are now leaking directly onto the concrete below (just a constant dripping). What are they and do I...
Snaking issue
[ 2 Answers ]
Hello I have a problem, I tried to snake out my plumbing problem myselg and well the snake got stuck on something snapped off and went down in my vent/drain system. Now I am having Major Major problems. I don't know how to to stop the flooding, if I flush the toilets it floods, if I was clothes...
Small roof to protect heat pump from snow off metal roof
[ 5 Answers ]
We are getting a metal roof put on our old house. This means that the snow will slide off and land onto our air source heat pump. We need to construct a small roof to protect it. We were thinking of extending the 2 x 6 roof rafters another 4 feet and then having 2 x6 or 4 x 4's going back to the... View more questions Search
Add your answer here.
|