Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water shooting out from behind shower hot and cold valves
[ 3 Answers ]
When I turn on the shower, water is not making it up to the shower head, rather spraying out from behind the knobs to turn the shower on? Is it just bad gaskets? How should I repair.
Shower Diverter - Hot/cold handles hard to turn
[ 4 Answers ]
My shower has the standard 3 (not sure of brand) valve set up. All of the valve handles are very hard to turn and I am wondering is there a way of loosening any part of the stems to reduce the tension? I am not sure but I think a long time ago I read that when the stems are installed in a closed...
Replace shower Plumbing Valve assembly shower head 2 knobs
[ 3 Answers ]
In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...
Low water pressure in bathtub/shower hot or cold
[ 7 Answers ]
My shower/bathtub has no water pressure. It does not matter if you turn the cold or the hot water on. The rest of the house is not having any problems with water pressure just this particular bathtub/shower. I tried removing the water spout to see if anything was stopping it up, but it won't...
Hot water running cold in shower
[ 6 Answers ]
We just had a new peerless tankless boiler put in our home. With the old boiler we had no problem with the hot water in the showers. However, when we replaced the shower controls I did have to make an adjustment on the pipes of the oil boiler. I turned a knob on one of the pipes that seemed to... View more questions Search
|