Ask Experts Questions for FREE Help !
Ask
    lax510's Avatar
    lax510 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 16, 2010, 11:46 AM
    What do I need to connect a DSC 1832 control panel to a Control 4 home automation sys
    What do I need to connect a DSC 1832 control panel to a Control 4 home automation system?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 24, 2010, 06:01 AM

    I don't see DSC as a Partner.
    Crestron has Partners and there is a Module needed to connect the DSC SEcurity with the Crestron, go to this link and see the sample screen:
    Integrated Partner Modules - DSC [Crestron Electronics, Inc.]
    DSC does make an Automation Module, and besides being able to control Security System, Lighting Control, Thermostat, etc by keypad, you can also control by local phone or remote phone.
    Didn't see this post until today. Good Luck.
    Call Control4 and see if DSC Integrates/communicates with them.
    Marty70's Avatar
    Marty70 Posts: 8, Reputation: 1
    New Member
    		  
    #3

    Jan 25, 2011, 07:28 PM

    Here is a link for DSC that explains what to use.

    DSC
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

DSC PC 1832 programming troubles [ 9 Answers ]

Hi…I am currently replacing an old DSC PC 2525 home security system with a newer PC 1832. The trouble is… I am having difficulty even getting to first base programming this unit Is there someone on board who can walk me through this? This is what I have: 2 new keypads.. a pk 5501 at the...

Dsc alarm 1832 connection to control 4 home automation4 [ 2 Answers ]

What do I need to connect a DSC 1832 control panel to Control home automation system?

Is there a way to reset master code on dsc 1832 [ 2 Answers ]

I have a DSC 1832 security system at my home but never got the master code from the installer who I have now lost touch with. I need to set the clock on my 5501 keypad and it appears that requires the master code. I have the installer code which is still the default code and I have my user code...

Trouble with DSC 1832 programming [ 3 Answers ]

Recently I have installed dsc 1832 security system . So far I have done good. But I can not solve my smoke detector problem . Smoke detector is FSA-410BT 4-wire . I have run cat5 wire for this connection . The reason is simply - I had left over cat5 . I have used Bro for 12v+ and BLU for GND....

Dsc 1832 resistor value [ 1 Answers ]

I have a DCS 1832 and I am getting intermitting open. The wires at the control panel are tightly secured. It could be a resistor problem and I am unsure of to what the resitor value should be for the zones. Can you help?

View more questions Search