Ask Experts Questions for FREE Help !
Ask
    aabts's Avatar
    aabts Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2010, 08:51 PM
    '98 Troy-Bilt won't climb and takes off down hills
    I have a '98 Troy-Bilt Pony. It "cuts loose" going down slight inclines and is now having trouble going up small inclines. I'm thinking it could be a belt, pulley, or transmission, but not sure. Any help would be greatly appreciated.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 16, 2010, 08:46 AM

    Hi,
    No model given, but it should not freewheel downhill. Belts would be the first suspect. Also, did not say the drive system, so it is hard to go further.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy bilt primer [ 1 Answers ]

Primer bulb on troy bilt lawnmower is not squirting gas into carbuerator--how to correct?

Troy-Bilt PTO [ 1 Answers ]

My pto will not engage how do I check if relay or switch is bad? I checked at the plug for the clutch and I am not getting power.

View more questions Search