Ask Experts Questions for FREE Help !
Ask
    manuel58's Avatar
    manuel58 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 1, 2010, 11:24 AM
    starter for murray riding mower
    I have a model No. 30500x92A I have tried to start the mower with a schooldriver and the starter only clicks. Where can I get a book to show me how to replace the starter?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 1, 2010, 11:33 PM

    Hi,
    You did not state the engine brand, so the following link is for Briggs single cylinder L-head engines:
    http://www.mymowerparts.com/pdf/Brig...20STRATTON.pdf
    Peace,
    Clarke
    manuel58's Avatar
    manuel58 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 3, 2010, 03:19 PM

    Tecumshe 10 Horse power fomula XL/C
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Aug 3, 2010, 03:36 PM

    Hi,
    Then try this link:
    http://www.smallenginesuppliers.com/...nformation.pdfIt is just four bolts that a #3 Phillips or a7/16" socket fits; two ar on each side; plus the wire from the solenoid, of course.
    Peace,
    Clarke
    manuel58's Avatar
    manuel58 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Aug 3, 2010, 05:24 PM

    Do I need to take off the gas tank frist to get to the starter?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #6

    Aug 3, 2010, 05:38 PM

    Hi,
    Well I can bet the nut holding the wire from the starteris accessible, but I cannot say. If all four screws /bolts are visible without removal, then the starter will drop downward.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Starter on craftman riding mower [ 1 Answers ]

Craftman riding mower, would not start just try to turn over and make a draging sound, replaced sylinoid, still would start sometime but would drag then also, replaced starter,started at first mowed once turned off won:t do anything, does just like it did before I started putting parts on it, was...

Starter solenoid for riding mower [ 2 Answers ]

I need to know about a solenoid for a mower, are both poles on the solenoid supposed to be hot all the time? Mower has no power to the starter and the battery is charged, try to find out to test the starter and the starter solenoid.

Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]

I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.

Riding mower starter [ 1 Answers ]

Where can I by a starter for a 12.5 hp Centrat Park riding mower?

Murray riding mower [ 3 Answers ]

I have a murray riding mower that I have replaced the solinoid and the starting switch but I still get no power to the starter. I can hot wire the starter and it will crank so there must be a problem somewher in the wires??

View more questions Search