Ask Experts Questions for FREE Help !
Ask
    wilma06's Avatar
    wilma06 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 31, 2010, 07:14 PM
    Troy built drive belt for a chpper/shredder MH47321 chippewa style
    What size drive belt do I use on a troy built chipper/shredder MH47321 chippewa style
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 1, 2010, 10:26 AM

    Hi,
    Well, it was a long hunt, but a breakdown is here:
    TroyBilt cs Parts Diagram Index for 47321 CHIPPEWA STYLE
    And the part number 1762636 which seems to be 1/2" x 38" belt.
    Strongly suggest one with a Kevlar sheath if you go with an aftermarket belt,
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy Built Loose Drive Belt [ 3 Answers ]

I just started using my Troy Built Model 830 5.5 hp self-propelled mower and it works fine without a load; however, the belt is too loose to cut grass. I don't see any adjustment for taking the slack out of the belt. I bought this at Home Depot about two years ago, but just tried to use it when my...

Replacing a drive belt on 18hp Hydro Troy Built riding mower [ 1 Answers ]

I need to replace my drive belt on my Troy Built 18 horse power hydro riding lawn mower. The belt has been shredded, and I cannot find a serial number or code on the belt to match it with. The local tractor parts store tried to piece the belt back together and size it on their belt guide, but no...

Troy Built Bronco Drive Belt [ 1 Answers ]

How do you change the drive belt on a Troy Built Bronco mower. The manual only covers the deck belt. Thanks, Bill

Troy-built super bronco drive belt [ 0 Answers ]

How do you replace,or put the drive belt back on the mower? Or where can I get this information?

View more questions Search