Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter fan 3 pull switch
[ 27 Answers ]
Hello: I have removed the well tec E116997 switch as the chain broke off in the housing. I have Replaced the chain but can't get the right combination of positioning to get the pull sequence. I can buy a 3 pull light switch but don't know if that would be safe.There is a Capacitor in the circuit...
Fan switch on hunter ceiling fan model #20537 not working.
[ 1 Answers ]
The fan switch on my hunter ceiling fan model #20537 is not working. What colored wires are supposed to go into the switch, and at what position on the switch? I have 3 wires, green, brown and gray. The switch has 4 slots, 3 L 2 1
Three speed hunter fan switch
[ 1 Answers ]
I am trying to wire a hunter fan switch, three speed. Whitch colors go to the numbers?I tried 1=Gray 2= Brown 3=Green L=Black. Stays on high speed. What have I done wrong? Please advise. Ann
Hunter fan 3 speed fan pull switch broke
[ 1 Answers ]
My wife and her mood pulled the fan speed cable and yanked it out of the fan. How can I remove the cover or get to the part so I can put the chain back in to turn on the fan. This is a hunmter 3 speed fan with 4 lights attached under the fan. I could not find the model number.
Hunter Fan Switch
[ 1 Answers ]
I was just wondering if the light switch on a Hunter fan has to replaced with a Hunter light switch, specifically. The electrical guy at Lowe's in our area says 'no' that a light switch to a fan is 'universal.' The light switches they sold at the store could be used on any brand of fan. Could... View more questions Search
|