Ask Experts Questions for FREE Help !
Ask
    media44's Avatar
    media44 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 20, 2010, 03:41 PM
    What to do if crankshaft is bent
    What to do if crankshaft is bent
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 23, 2010, 01:47 PM

    Hi,
    Some dealers can staighten it. They will probably want you to sign a form saying that it is not a recommended repair and removing their liability.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Measureing crankshaft [ 1 Answers ]

So I can use a caliper to measure the journals on a crankshaft

Crankshaft smoothing [ 1 Answers ]

If a crankshaft has scratches on the journal due to main an rod bearing wear,what could I use to make the journals smooth again. Thank you

Setting the camshaft and crankshaft the most quick way.is it possible [ 1 Answers ]

Can I set the crankshaft and camshaft for alignment by rotating the wheel front in a driver side (jacked) note: that the shifting lever is at 5th gear Thanks!

Crankshaft Pully Bolt [ 5 Answers ]

Trying to loosen the crankshaft pulley bolt on a 87 Honda accord. Can't find away to hold the pulley and turn the bolt. Any help would be appreciated.

Crankshaft pulley removal [ 3 Answers ]

Well, I've decided to do a major service by myself and in my research, I found that the crankshaft pulley is a very difficult thing to remove. This is for a 95 civic DX SOHC. Napa autoparts does not have a tool for the job. I have seen some online, but am wondering what others recommend. Some...

View more questions Search