Ask Experts Questions for FREE Help !
Ask
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #1

    Jul 2, 2010, 06:35 PM
    SDR 35 (Bell is input side, right?)
    Bell is the input side of SDR 35, right?
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Jul 2, 2010, 06:57 PM

    If your talking about a raised lip on the gasket then that goes on the side closest to the bottom of the lip. It's there to prevent backflow.

    http://www.plastictrends.com/products/pdf/G_Series.pdf
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Jul 2, 2010, 07:13 PM

    No this stuff: http://www.lowes.com/pd_24141-1814-P...pe$identifier=

    Which end is supposed to be in? It's not gasketed. Don't plan on solvent welding it to put lengths together. Drainage application.

    I don't think Lowe's sells any gasketed SDR fittings.
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #4

    Jul 3, 2010, 03:34 AM

    Yes. Bell is the input side. Sorry I looked up the wrong stuff the first time. I saw the sdr35 and looked it up :)
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #5

    Jul 3, 2010, 03:36 AM

    Thanks.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #6

    Jul 3, 2010, 06:38 AM

    Rule of thumb for all fittings with a hub.
    The flow goes from the male end into the hub. Good luck, Tom
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #7

    Jul 3, 2010, 06:53 AM

    Except when it's leaving a catch basin. :D
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Side mirror switch works side to side and down but not up on both sides [ 1 Answers ]

Side mirror switch works side to side and down but not up on both sides for plymouth voyager 1998

Pipe type from cast iron to ABS or SDR? [ 4 Answers ]

I got very helpful information from speedball regarding the test plug to be placed at the bottom of the pipe being laid from the house to the sewer connection in our conversion from septic to sewer. I have 2 more questions- 1. We have a cast iron 4" pipe leaving from the house and need to connect...

Jeanne Bell, sister of Alexander Graham Bell [ 9 Answers ]

I am trying to find out information on Jeanne Bell, i.e. parents, date of birth, marriage, etc.

Kenmore Elite not cooling refrigerator side or side by side [ 2 Answers ]

I have a Kenmore Elite Model 53609202 side-by-side. The freezer is working fine, the air flow into the freezer is working, the fan is on. There is another fan in the bottom rear that is also on. There is nothing in the refrigerator to block the vents. There is a little frost on the rear panel...

View more questions Search