Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to lay out a pattern to cut 45 degree angle on a 8 inch pipe
[ 1 Answers ]
I want to cut a 45degree angle on a 8inch steel pipe so that I can put the to 45 degree angles together and weld them. How can this angle be laid out on paper for pattern.Thank you Builderbob27b.
Miter cut angle
[ 1 Answers ]
I know it's a bevel cut. The fascia boards are joined at the corners. I tried a 45 degree bevel Angle but the boards cuts would not line up. What is the adjustment # on the miter saw?25768 My Miter saw only banks to the left for fascia boards, trim, maybe that is the problem?
Velocity at 30 degree angle
[ 3 Answers ]
I want to check if I am on the right track. Question: Santa loses his footing and slides down a frictionless snowy roof that is tilted at 30 degrees. If Santa slides 10m before reaching the edge, what is his speed as he leaves the roof? Would I use ax=g sin (theta) and then take my results...
Installing ceiling fan on 70 degree angle
[ 3 Answers ]
Help I am trying to install a ceiling fan on a sloped ceiling, 70 egree angle. I am just replacing the one the builder put in, but I can't find one that will fit that steep of a sloap. The one I am trying to install is a harbor breeze model from Lowe's. Then I went to Home Depot and asked what... View more questions Search
|