Ask Experts Questions for FREE Help !
Ask
    reachsulip's Avatar
    reachsulip Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2010, 06:22 PM
    York diamond 80 furnace troubleshooting
    How to light the pilot of the york diamond 90 furnace
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Jun 2, 2010, 06:24 PM

    It is a ignitor, it lights itself
    reachsulip's Avatar
    reachsulip Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Jun 2, 2010, 11:36 PM
    Where is the ignitor located. I only see a Red box outside the furnace with a ON and OFF switch.
    reachsulip's Avatar
    reachsulip Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Jun 2, 2010, 11:45 PM

    I guess figured the ignitor which is near the combustion blower and burner box. What do I do to light the flame. The issue all happened when the power outgage in our area.
    reachsulip's Avatar
    reachsulip Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Jun 2, 2010, 11:47 PM
    Quote Originally Posted by reachsulip View Post
    How to light the pilot of the york diamond 90 furnance
    I guess figured the ignitor which is near the combustion blower and burner box. What do I do to light the flame. The issue all happened when the power outgage in our area.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #6

    Jun 3, 2010, 04:46 AM

    Try turning the power off then back on. Also check the fuse.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York diamond 80 furnace troubleshooting [ 2 Answers ]

Won't stay lit. error status is 5 blinking lights. Can be reset after disconnecting and reconnecting power. Sometime may be started by turning off and then restarting. Sometime igniter will begin to glow, but stops quickly before the gas starts. The small top blower is running and the large bottem...

York Diamond 80 Furnace Blowing Cold Air [ 4 Answers ]

York Diamond 80 Furnace Blowing Cold Air. About five years old. Red light is flashing four times.

York diamond 80 furnace parts [ 0 Answers ]

Furnace diagnostic light indicates rollout open. Service tech came out and found that rollouts were not tripped. He seems baffled by the problem. The problem is inconsistent. The thermostat calls for heat. The furnace kicks the blower on without igniting burners. Cold air blows through vents. I...

YORK Diamond 90 Furnace code 7 [ 2 Answers ]

YORK Furnace Diamond 90 Model P3URB10N05501D Shows a code 7 What do I do now?

York diamond 80 furnace last two burners won't light [ 1 Answers ]

I have a York Diamond 80 furnace. The first two burners light up but the others won't. After about 4-5 seconds the burners turn off but the fan is till running and blowing out cool air.. What do I need to do other than calling someone.. Please help.. Thanks

View more questions Search