 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harley davidson troubleshooting
I have a 1989 Harley Soft-tail custom 1340. When out on the road running, it coughs back through the carburetor and pops through the exhaust. I don't know if it's a shorted wire somewhere, a valve or the jets in the carb wrong. It has a Keihen Carb. On it and Samson street sweeper pipes on it.
Thanks. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
All electrical works but hit stater switch then nothing
I have '57 panhead, just replaced plugs and points. Fires first kick then starts backfiring and running rough, won't idle. Previously would start, run a minute then die, souds like running out of gas. Float may have been stuck (linkert carb, what else?).
I have a 2003 fatboy carb... after start up hot or cold sometimes the engine runs rough and sputters on acce has k&n air filter crane cam power commander and non harley exhaust.. have replaced plugs plug wires o-hauled carb all with harley parts seems like its flooding... when issue occures I turn...
2001 FXDWG-left turn signal flashes at normal speed, then flashes rapidly. Both the front and rear signals flash together, so I know it is not a burned out bulb. The right signals flash normally.
Does a 1975 Harley Davidson motorcyle need to have lead added to unleaded gasoline to run correctly?
View more questions Search
|
