Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing fireplace tiles
[ 2 Answers ]
I bought new tiles to replace the old tiles in front of my fireplace, which is on floor level. The new tiles are thicker than the old tiles, so that the wood floor is not as high as the tiles, making it impossible to grout along the edge with the wood floor. Should I break up the concrete slab that...
Replacing fire-box brick veneer panels in fireplace insert
[ 2 Answers ]
I have a fireplace insert that has a gas pipe leading into it, but the gas is capped and has not been used. There are three, 1 inch thick brick veneer panels that line the fire box. The previous owner used the fireplace as a wood burning fireplace. I do also. I noticed a crack in the rear...
Painting stucco fireplace wall.and accent bricks
[ 3 Answers ]
Hi - I'm hoping that someone can help me with a few questions I have about my Fireplace in my craftsman/bungalow. I want to paint over the existing color on the fireplace wall, which is stucco. (The other walls in the room I've already painted). I'm also not too keen on the color of the...
Replacing a fireplace face,
[ 1 Answers ]
I'm in the process of refacing a fireplace. After removing the original rocky face the wall underneath is not very even. How do I even out the surface, and what would be the most effective way to tile the face of the fireplace? Can I do it without chicken wire or cement backer board? Do I...
Replacing fireplace refractory panels
[ 1 Answers ]
Can the fireplace refractory panels be replaced with firebicks View more questions Search
|