Ask Experts Questions for FREE Help !
Ask
    ozzball3001's Avatar
    ozzball3001 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2006, 04:11 PM
    Snow blower
    I got a new snow blower last year and used it once, worked great, this year it won't start. Primer is just pushing air, gas line is not bloked. I put I little gas in the spark plug cylinder and it fired up for a second. Gas is not going through the carb, is something stuck, what should I do. I did put stabil in the gas but didn't run it through the carb.
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #2

    Dec 2, 2006, 08:35 PM
    Stabil in the gas... and didn't run it to get it in the carb? That doesn't protect the carb from gumming up...
    Does it have a fuel solenoid on the bottom of the carb? (big thing, has a couple wires out of it)
    If not.. then it's the main jet.. just needs a good tear down (the carb) soaking in carb cleaner and all holes blown out with compressed air.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ariens old snow blower with problems! [ 4 Answers ]

Well my friends gave me an older my guess is 1980s snow blower with and 8 horse power motor, it did not run my guess was the carb,took it apart sprayed the holes and got as much junk out of the tank as I could put it back on and did not fire up it tried but there was not gas coming into the...

Ultra by murray snow blower [ 1 Answers ]

Hello, Looking for impeller for ultra murray model f2484020,code5212,ser002313337309 8hp,hmsk80, any help thank you greg

Snow queen? [ 2 Answers ]

:rolleyes: I watched a weird version of the snow queen when I was little and can't find it! :mad: It was a badly dubbed 70's film or mayby 80's. Think it was originally made in German. The boys Name is Kay and the girl was Gretta I think. In the beginning there is an ink pot on a cabbinet...

Snow blower shear pin [ 1 Answers ]

I broke a shear pin on my craftsman snow thrower. The head and retainer nut are sheared off properly but I don't know how to get the actual pin out of the shaft. Should I just use a small screwdriver and hammer and just knock it out? I have replacement pins.

View more questions Search