Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Black wire red wire and white wire spliced to 10/3 on a 220 circuit
[ 25 Answers ]
I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...
Can I use a ground wire for a ground and live black or hot wire at the same time?
[ 8 Answers ]
I only have 3 wires from my ceiling to connect to my fan/light, the black, white and bare ground. No problems setting up in this room to only one switch but I would like to have the duel fan/light switch in like in my other rooms without having to pull a wire from the ceiling down to the switch,...
I only have a white wire and a black wire how do I connect them to the receptacle
[ 2 Answers ]
I have 1 white wire and 1 black wire how do I connect them to the receptacle?
How do I wire a switch with pilot light with 1 black, 1 white, and 1 ground wire?
[ 1 Answers ]
I replaced an outdoor outlet controlled by an interior switch with a Cooper gfci outlet and it tested fine. Then I replaced the existing switch with a Cooper switch with pilot light. The switch has one line coming into it with one white(hot), one black(neutral), and one ground. When I connect...
Can I use a single strand of lamp wire as the ground wire for a chandelier?
[ 2 Answers ]
I am in the process of rewiring a chandelier to lengthen the chain. I have wired it using a single strand of the insulated lamp wire as the ground - is this safe/ok to do instead of using the exposed copper wiring I typically see for the ground? View more questions Search
|