Ask Experts Questions for FREE Help !
Ask
    sigasa's Avatar
    sigasa Posts: 5, Reputation: 1
    New Member
     
    #1

    Feb 16, 2010, 10:21 AM
    How to reset the installor code on a 1832 when the code was locked
    I need to reset the installor code, itry to put a jumper betwween output 1 and zone 1, everything reset except the installor code, can you help me...
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Feb 16, 2010, 10:33 AM

    Did you Power down, remove Battery, AC, Do the Jump and follow the exact order?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Feb 16, 2010, 10:45 AM

    Try this:
    Factory Default Main Panel (Hardware)
    Step 1 - Remove AC and battery from the panel.
    Step 2 - Remove all wires from the Zone 1 and PGM1 terminals.
    Step 3 - With a piece of wire short the Zone 1 terminal to the PGM1 terminal.
    Step 4 - Apply AC power to the main panel.
    Step 5 - When Zone Light 1 is lit on the keypad the default is complete.
    Step 6 - Remove AC power from the control
    Step 7 - Reconnect all original wiring and power up the control.
    sigasa's Avatar
    sigasa Posts: 5, Reputation: 1
    New Member
     
    #4

    Feb 16, 2010, 11:13 AM
    Quote Originally Posted by Stratmando View Post
    Try this:
    Factory Default Main Panel (Hardware)
    Step 1 - Remove AC and battery from the panel.
    Step 2 - Remove all wires from the Zone 1 and PGM1 terminals.
    Step 3 - With a piece of wire short the Zone 1 terminal to the PGM1 terminal.
    Step 4 - Apply AC power to the main panel.
    Step 5 - When Zone Light 1 is lit on the keypad the default is complete.
    Step 6 - Remove AC power from the control
    Step 7 - Reconnect all original wiring and power up the control.
    I did that but the installor code does not reset .
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #5

    Feb 16, 2010, 11:32 AM

    All else you may want to try something like this:
    Security Alarm Panel Unlocking Services
    A New Board for that panel is less than $100.00
    You tried *8 5555
    And *8 5010 ?
    sigasa's Avatar
    sigasa Posts: 5, Reputation: 1
    New Member
     
    #6

    Feb 16, 2010, 11:57 AM

    Yes,thank you...
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #7

    Feb 16, 2010, 04:07 PM

    Anything work? Just Nod, you don't have to say anything.
    sigasa's Avatar
    sigasa Posts: 5, Reputation: 1
    New Member
     
    #8

    Feb 17, 2010, 04:20 PM
    Quote Originally Posted by Stratmando View Post
    Anything work? Just Nod, you don't have to say anything.
    No nothing work, I think I will buy another board, thank you for your help.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #9

    Feb 26, 2010, 07:54 AM

    They must have enabled Installer Lockout.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I get code or reset code for my kenwood kvt-614 [ 1 Answers ]

Im trying to figure out how to find the code for this radio or how to reset it?

Reset code for kenmore dishwasher [ 0 Answers ]

How do I reset the code on my kenmore dishwasher. The green light is flashing.

How do I get code or reset code for my kenwood kvt-614 [ 0 Answers ]

I purchased this "7 touch screen on craigslist.It is a kenwood excelon kvt-614. After installing noticed it was locked . I called kenwood & they said I would need proof of purchase for them to unlock wich I can't get because I bought off craigslist. Is there any other way to unlock this or reset it...

Reset code [ 1 Answers ]

Hello everyone. Would anyone happen to know the reset code for a 2000 Honda Accord EX radio?


View more questions Search