Ask Experts Questions for FREE Help !
Ask
    benji925's Avatar
    benji925 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2010, 10:49 AM
    Glacier Bay Faucet
    I have a Glacier Bay Bathroom faucet Model # USCR216RMH that leaks around the cold water handle. I'm wondering if anyone can provide me with an Installation/Troubleshooting instruction sheet for this faucett as well as a Replacement Parts schematic with part numbers. Thanks.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Jan 22, 2010, 11:26 AM

    Is that shower/tub faucet or sink faucet ?

    If you see leak around the handle than it is possible that the nut, or trim piece, that holds cartridge in needs to be tighten up a bit. If that doesn't help than it is most like worn out O-ring. In this case I would suggest that you purchase brand new cartridge.
    benji925's Avatar
    benji925 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 22, 2010, 12:03 PM
    Quote Originally Posted by Milo Dolezal View Post
    Is that shower/tub faucet or sink faucet ?

    If you see leak around the handle than it is possible that the nut, or trim piece, that holds cartridge in needs to be tighten up a bit. If that doesn't help than it is most like worn out O-ring. In this case I would suggest that you purchase brand new cartridge.

    It is a sink faucet. My problem is getting at the cartridge, O-ring, etc. as well as knowing the part number(s) to ask far. The parts are still under warranty but I need to know what to ask for.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need a part for a glacier bay faucet [ 12 Answers ]

First glacierbayfaucet.com does not work, it takes you to the Home Depot website (which does stock glacier bay faucet parts, however it does not stock the one I am looking for. In the assembly/installiation illustration for a Glacier Bay Teapot 4" model 408C-0301, I am looking for the plastic...

Glacier Bay Faucet [ 6 Answers ]

We have a Glacier Bay Faucet installed in our kitchen in 2005. The neck swivel is very stiff. Is this normal, or should it swivel easily. Is this intended to be lubricated, and if so, how is this done? Thanks!

Glacier bay faucet handle [ 2 Answers ]

Looking for a Glacier Bay Model 8184 Faucet Handle part

Glacier Bay Faucet [ 2 Answers ]

I have a two year old Glacier Bay kitchen faucet with pull out spray head. Recently the faucet is very difficult to pivot, so much so that the base plate on the sink twists when you try. I uninstalled, cleaned, lubricated and re-installed the faucet and it is still the same. My trip to Home...

Glacier Bay faucet with still swivel [ 2 Answers ]

I also have a Glacier Bay faucet with a very stiff swivel. I do not have the product number but it is a single handle unit with a soap dispenser installed in 2006. Is this fixable with a replacement part?

View more questions Search