Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
140 volts after new outlets were put in, 120 before?
[ 10 Answers ]
I just replaced two old outlets with two new ones. I wired them exactly as they were wired originally. When I returned the power to the circuit the voltage is 140 when originally it was 120. What did I do wrong? I tightened everything and rechecked the connections. Will I burn up appliances...
220 volts to 120 volts
[ 5 Answers ]
I currently have a 220 volt/30 amp service to an electric washer/dryer combination. The washer/dryer broke down and I will be switching to individual units each requiring a 120 volt/15-20 amp supply suggesting a separate circuit. The current unit had a four wire configuration (2 hot -...
120 volts between utility supplied neutral and ground?
[ 1 Answers ]
I'm troubling shooting the lighting and the entrance to our community and have run into a problem. I thought I was just going to replace some bulbs, maybe a ballast, but things have gotten worst quickly. Turns out that with the main circuit off I still have 120 between the neutral and ground. I...
120 volts vs 240 volts tools
[ 3 Answers ]
How do I configure a 120 volts 60hz woodworking tools bought in the usa to work on a 240 volts 50hz power rating in my country without having to compromise the motor operation. I understand that the stepdown transformer can only reduce the voltage but not the cycles. That means that a tool with... View more questions Search
|